- No products in the cart.
Sold out
Park Tool - Replacement Jaw Covers For Repair Stand
$3.45
Out of Stock
Super Fast Nationwide Shipping! View Shipping Information
Description
PARK TOOL - REPLACEMENT JAW COVERS FOR REPAIR STAND
Replacement jaw covers for most Park Tool stands, for full information on clamp covers click here:
MICRO-ADJUST CLAMPS:
- K-1960 (2010-):
The 1960 fits the jaws clamp used on the PRS-25, as well as the 100-3D and 100-5D clamps, as featured on our PCS-4, PRS-2.3, PRS-3.3, PRS-4.2, PRS-4W, PRS-7 and PRS-33.2. The covers are nominally 7cm long.
HOME MECHANIC REPAIR STANDS:
- K-2860 (2019-):
The 2860 fits the jaws on the PCS-9.2, PCS-9.3, PCS-10.2, and PCS-10.3. 2860 jaw covers are almost the exact same shape as the 1960, but thicker, enabling these home mechanic repair stands to clamp tubes as small as 7/8". The covers are nominally 7cm long. -
K-1185K (2004-2018):
The 1185K fits the clamp jaws on the PCS-9, PCS-10, PCS-11 and PCS-12 repair stands. The covers are nominally 9cm long.
ADJUSTABLE/SPRING LINKAGE CLAMPS:
-
K-468B (CURRENT MODEL):
468B are the current clamp covers for the 100-3C, 100-5C, 100-8C, 100-8Y and 100-9C clamps. These are the “standard shop” clamps found on such models as the PRS-2, PRS-2 OS, PRS-2.2, PRS-2.3, PRS-3, PRS-3 OS, PRS-3.2, PRS-3.3, PRS-4, PRS-4 OS, PRS-4.2, PRS-7, PRS-5 and PCS-4. The covers are nominally 10cm long. -
K-468G (PCS-1 & PCS-2):
The 468G fit the clamps of the 100-1C, 100-1CA, and 100-2C. These were the clamps on the final generation of the PCS-1. Jaw covers are colored gray. The covers are nominally 10cm long. NOTE: Use care not to confuse the 468G with the 467G jaw covers. The two are not interchangeable. -
K-467B (PRS-3 & PRS-2 - SINGLE CABLE RELIEF):
The 467B fits older 100-3C, 100-5C and 100-8C clamps. These older generation clamps were used on older shop stands such as the PRS-3 and PRS-2. The covers are nominally 10cm long. -
K-467G (PCS-1 - SINGLE CABLE RELIEF):
The 467G fits the clamps of the older versions of the 100-2C clamps. These were the clamps of the early generation of the PCS-1. The covers are nominally 10cm long.
EXTREME RANGE CLAMPS:
- K-1259 (2004-2015):
The 1259 fits the clamp jaws of the 100-4X, 100-6X, 100-7X, and 100-15X (used on the PRS-15). The cover is held in place by two studs protruding through the clamps. The studs are held with clips. The covers are nominally 9cm long. -
K-1002 (2001-2003):
The 1002 fits the clamp jaws on the 100-3X and 100-5X extreme range clamps. The cover is held in place by two studs protruding through the clamps. The studs are held with clips. The covers are nominally 9cm long.
Additional Information
| Size | Park tool 3/8 16 hex jam nut prs 5 (pre 12/01), Park tool adjusting barrel pcs 4, prs 2 7, Park tool bench mt weldment pcs 2, prs 7, Park tool bench support prs 4.2, Park tool button head cap screw 1/4 20 x 5/8 100 4 x,6 x, bbt 9, wag 5, Park tool cam lever spring 100 4 x, 100 6 x, 100 15 x, Park tool cap screw 5/16 x 18 pcs 4, prs 2 5,13, Park tool center knob prs 5 (pre 12/01), Park tool center yoke prs 5 (pre 12/01), Park tool clamp assembly pcs 9, Park tool clamp handle 100 3 d/5 d/25 d, Park tool clamp handle knob 100 3 d/5 d/25 d, 100 7 x, Park tool clamp handle spacer isc 4, 100 3 d/5 d/25 d (post 1/11), Park tool clamp knob screw 5/16 x 1/2 100 3 d/5 d/25 d, 100 7 x, Park tool clamp screw pcs 10/11/12, Park tool clamp t handle weldment pcs 9, Park tool clamp tapered compression cone pcs 10, pcs 12, Park tool clamp cover set - for 100-4x, 100-6x, 100-7x, and 100-15x clamps, Park tool clamp adaptor for prs 15, Park tool e clip 3/16" for clamp covers pcs 9/10/11/12, Park tool ext range clamp pcs 1,2,4, prs 5,7, Park tool extension collar quick release assy. pcs 10, Park tool extension for prs 13 up, Park tool extreme range clamp prs 15, Park tool front end cap prs 5, Park tool handle screw 100 3 d/5 d/25 d, 100 7 x, Park tool handle screw cap 100 3 d/5 d/25 d, 100 7 x, Park tool height adj. bolt prs 3 os, prs 13, prs 33, Park tool height adjustment clamp assembly pcs 9, Park tool hex head bolt 1/4 20 x 2 pcs 1/4, prs 20/21, es 1/2, Park tool hex nut 1/4 20 es 1/2, mlp 1.2, pcs 1/4, prs 20/21, ts 2.2/4/8, Park tool jam nylok nut 5/16 x 18 pcs 1,2, prs 5 7,13, dp 1, dp 2, Park tool jaw screw 1/4 20 x 3/8 100 4 x, 6 x, 7 x,15 x, prs 20, prs 21, prs 23, Park tool knurled nut prs 2 7, Park tool large knob & shaft prs 20, prs 21, prs 23, es 1, es 2, Park tool leg elbow end cap prs 5, Park tool leg elbow joint prs 5, Park tool leg strut yoke prs 5, Park tool leveling end cap (black) pcs 1,4, Park tool linkage complete pcs 4, prs 2 7, Park tool moveable jaw hex barrel pcs 9/10/11/12, Accessory only - park tool plastic end cap - prs-3 os,4 os,13, Park tool revised bottom bracket saddle prs 20, prs 21, prs 23, pb 5, Park tool revised center yoke prs 5 (post 12/01), Park tool revised clamp nylon washer 100 3 d/5 d/25 d (post 1/11), Park tool revised eye bolt pcs 4, prs 2 7 (#122 s), Park tool revised threaded barrel 100 3 d/5 d/25 d (post 1/11), Park tool revised yoke sleeve pcs 10 (post 9/07), Park tool rotating jaw hex barrel pcs 9/10/11/12, Park tool spring linkage clamp pcs 1, 2 pre 6/96, Park tool spring linkage clamp pcs1, 2 after 6/96, Park tool steel extension tube pcs 10 (post 9/07), Park tool steel upright tube pcs 10 (post 9/07), Park tool swing handle pcs 9, Park tool swing handle assembly pcs 9, Park tool tapered sleeve pcs 1,2,4, prs 5,6,7,15, Park tool top tube swing handle pcs 10/11/12, old style prs 15, Accessory only - park tool top tube upright - prs-3 os, prs-13, prs-3m, Park tool uright sleeve prs 20/21, es 1, es 2, Park tool washer 1/4 9/16 x.062 bbt 9,crp,dt 1/3/4,ts 8,100 7 x,es 1/2,prs 22/22.2/33, Park tool washer 12 mm x 23 mm x 1.5 mm pcs 9, Park tool yoke sleeve pcs 9 (post 8/07), Park tool yoke sleeve pcs 9 (pre 9/07) |
|---|
Shipping
| Shipping |
We ship nationwide throughout New Zealand. |
|---|---|
| Delivery |
Estimated between and Will usually ship within 3 - 4 bussiness day. |
Why Buy From Us
Here are 5 more great reasons to buy from us:
1. Since 1938, Papanui Cycles has been serving the North West of Christchurch
2. After 80 years we are still offering great service.
3. Established as one of Christchurch’s largest suburban cycle shops.
4. With all Cycles we sell, we give a manufacturer’s warrant.
5. And.. exclusive to Papanui Cycles, we offer one Free General Service, valued at $80.00 after date of purchase.
1. Since 1938, Papanui Cycles has been serving the North West of Christchurch
2. After 80 years we are still offering great service.
3. Established as one of Christchurch’s largest suburban cycle shops.
4. With all Cycles we sell, we give a manufacturer’s warrant.
5. And.. exclusive to Papanui Cycles, we offer one Free General Service, valued at $80.00 after date of purchase.